Do not let spoil your summer!
And the fall - too!

Magic summer was over long ago! It was so short and so it was sad when the summer failed!

Escape for your summer!
Build a boat by yourself!

Spring is coming and it's time to think about fishing on your own boat next year!
Next summer, the gap should not be without a boat without fishing!

Find out,
how to build their own compact
! The most simple !
! To put it - just do nothing !
boat design classic and a half weeks,
spent less than 5,000 rubles
on which it is possible to put a small outboard motor.

In fact, who would not say it is simply elementary for those who are strong-willed and not afraid of new and whose hands are growing from the right place.
Even an inveterate "Botany" and he will build his boat on the book

A boat made ​​of wood and plywood.
How to Build it YourSelf.

* * *

From this book you will learn:

1. How does the boat:

lines plan,
glossary of terms,
a complete description of the structure.

2. What materials are needed to build a boat
Why and how should:

board
plywood,
glue,
screws,
ground,
paint,
varnish.

 

3. What tools are needed,
to build a boat properly:

plane,
hacksaw,
jigsaw,
screwdriver,
angle staff,
bubble level.

 

4. How to organize
blanking and gathering place
to build a boat:

mould left floor,
how many and what planks should prepare to quietly build a boat
how to draw the frames on the mould left floor,
declivity board - what is it and why this whole "abracadabra" for?

5. How to build a set of frames
for the hull:

assembly of the frame number 1,
midship frame assembly,
assembly of the transom,
methods of assembly
quality control of assembly
valuable suggestions on how to better and easier to do.

6. How could build a boat:

arrangement of slipway,
reconciliation of stocks and marking the main lines of the centerline plane, base plane,
obtain the exact form of the boat, given the lines plan.

7. Assembling the hull on the slipway:

installation of the frames on the slipway,
bevel - "monster" turns out to be a simple geometry, understandable even student,
how to cut stringers in the set,
quality control and assembly geometry,
EXCLUDES BEVEL - "miracle" that is available only elected - in fact it's just routine,
cut and install plating.

8. Completion of the boat after removal from the slipway:

Removing the boat from the slipway is a milestone!
installation of fin cans, oars and mooring, towing kevel,
hull attachments: today it is easier to buy,
while those who want to create not just a boat but a small masterpiece, they can do themselves.
It's easy!

9. Exterior finishing boats:

primer,
painting,
varnish,
color schemes and solutions.

You will also find in the book:
All required drawings and diagrams in A4 format,
Alphabetical index of the basic concepts
Glossary of shipbuilding terms
Detailed content of the book.

You will not regret taking the time to purchase this book. In it you will get the most complete information on how to build the most simple, compact wooden boat made ​​of plywood and wood, designed for 3 people.

The entire process of building not only described in detail,
and contains 190 color illustrations,
giving the "presence effect" at the shipyard - the construction site, where unfold
exciting event. Right before your eyes of a few sheets of plywood and a few boards, you first will outline, and then acquire "flesh and blood," a very nice boat out of plywood and wood traditional designs.

By the way! Keep the boat in the summer
easily be on the coast in the "bottom up"position!
She easely endure the entire season!
Detailed process for "longevity" of your boat, see the book!

This boat is far from the ugly "boxes", knocked together and sewn with wire, thickly smeared with a layer of putty and glass fiber with epoxy resin, which are abundant on the Internet. It's amazing, but these, I may say - "projects" have amazing vitality and wander on publications from the Soviet era, when it was not possible to get acquainted with how to look like a normal wooden boat made ​​of plywood.

I note the economic side of things. Even at current prices, you will spend for the construction of at least five thousand rubles, and had spent approximately one and a half to two weeks time, if you follow all the recommendations for priming and painting the boat.
This process is the longest,
because it requires each coat to dry about 8-10 hours.

In short, go on vacation and take the book with you. And when you sail the wife and kids in the hot July afternoon or early morning sail on the sunrise of misty shores, promising excellent catch
finally, make sure that the author did not lie.

So, if you heed the voice of reason and saw
in front of you a real chance to change his Summer for the better forever,
building super boat out of plywood and wood,
do not stand as a "dead stop"!
ACT!

Now, in the spring, the author realizes that it is necessary to save the future of the summer. It is important for many.
Therefore, the decision:
Lower prices and make the book accessible to ALL!

Old price pushed up to the first herbs!

The new price
like ALL!

Over the funny money you will receive secret knowledge that people have accumulated for centuries.
You'll be one of equals in the glorious cohort of shipbuilders.

His wife, children and friends can no longer simply "slap you on the shoulder."
Those who have not taken you seriously - will be ashamed!

You'll see how respect for you instantly grow
and you rightly deserve it,
When built your own boat out of plywood and wood,
their own hands!

Leave doubt, buy the book and start doing it!

If you wish to buy the book send me message to
Chif Designer

* * *

A boat made of wood and plywood. How to Do It YourSelf.

You will find in the book:
All the necessary explanations, drawings and diagrams in A4 format,
Alphabetical index of the basic concepts,
Glossary of shipbuilding terms,
Detailed content of the book.
You’ll not regret taking the time to purchase this book. You’ll get the most complete information how to build the most simple, compact wooden boat made of plywood and wood, designed for 3 people.
The entire process of building not only described in detail, and contains 190 color illustrations, giving the "presence effect" at the shipyard - the construction site, where the exciting events unfold. Right before your eyes of a few sheets of plywood and a few planks, you first will outline, and then acquire "flesh and blood," and became very nice boat out of plywood and wood traditional designs.
The book is in Russian. It will be translated into English.
Would you like to help? Write please to Chief Designer

* * *

If you have any whatsoever questions please contact: Chif Designer

Nice work and good build!

* * *